Dongfeng EQ2102GAJ off-road vehicle-Ricalt Automobile Technology (Hubei) Co., Ltd.

Home page

6x6 Military truck

Dongfeng EQ2102GAJ off-road vehicle

+86-19092959843

info@ricalttruck.com

Get Quote

More products

Description of Product

6×6 drive, flat-head one-and-a-half-row, flat-roof, air-conditioned cab, EQB190-20 type inline-six water-cooled, four-stroke, air-to-air turbocharged and intercooled diesel engine, 140Kw power, wheelbase 3475+1250mm, all-steel 145+50L fuel tank, Φ350mm diaphragm spring clutch, A130 type 6-speed transmission Mechanical transfer case, two-speed, synchronizer shift, electronic control pneumatic operation, 3.7-ton front axle, 4-ton and double rear axle, frame cross-section 232×75×6.5mm, 12.5R20 radial off-road tires, cab equipped with gun holder, power take-off and winch can be optionally installed.
Overall dimensions: 7591×2470×2740 (mm)
It can be used to carry meteorological, communication, electronic countermeasure, detection, repair, surgical, cooking and other field operation equipment, to tow light artillery or other light equipment, and to provide gas supply points.

Chassis Parameters

Structural type	Drive type	6×6
	Cab type	One and a half rows: flat head, two doors, one row seat with sleeper, tiltable
	Number of seats	3
	Force take-off mode	The power take-off on the right side of the middle shaft of the gearbox, the full power of the transfer box cover or rear flange
Dimensional parameters	Dimensions (length×width× height)	7591×2470×2740 (when fully loaded, press the cab roof)
	The plane above the frame is above the ground (full load) mm	The plane on the frame corresponds to the center of the front wheel: 995. The upper plane of the frame corresponds to the center of the rear suspension at the ground: 1004
	wheelbase mm	3475+1250
	Front overhang / rear overhang mm	1390/1665
	Approach/Departure Angle (O)	35/34
	Longitudinal Passing Angle (O)	36
Quality parameters	Maximum allowable gross mass after chassis modification (kg)	11250, allowing +3% error.
	Class II chassis curb weight (kg)	Half-belt air conditioning without winch: 5725, allowing +3% error.
	Class II chassis maximum loading mass (off-road) kg	With air conditioning without winch: 5315 (cab crew 3 people, 70kg/person, 11250-5725-210=5315)
	Maximum towing mass (off-road) kg	4800
	Axle load (empty/full) kg	With air conditioning without winch: front axle 3230/3640, middle and rear axle 3710/7010. With air conditioning with winch: front axle 3180/3580, middle axle and rear axle 3960/7270. +3% error allowed.
Performance parameters	Rated power/speed kw/r/min	140/2800
	Maximum torque N·m/r/min	650/（1300～1500）
	The maximum speed is km/h	90
	The minimum stable vehicle speed km/h	2.5
	Maximum Climb %	60
	Slope Standing Capacity %	40
	Minimum ground clearance mm	305 (lower edge of the bridge shell bulge)
	Minimum turning radius m	9.4
	Maximum vertical obstacle crossing height mm	650
	Maximum trench width mm	700
	Maximum wading depth mm	1000
	Fuel consumption per 100 kilometers L	22
	Maximum driving range km	750
Main assembly	motor	EQB190-20 is an in-line six-cylinder water-cooled, four-stroke, air-to-air supercharged intercooled diesel engine
	transmission	A130 type, mechanical, six forward gears, one often engaged reverse gear, long-distance rod system control
	transfer case	Mechanical, two-gear, synchronizer shifting, electronically controlled pneumatic control
	tyre	12.5R20 Widened tubeless off-road tires with optional all-steel radial deflated running tires with internal support

Customer Cases

60 unit Swing-arm Garbage Trucks being shipped to Southeast Asia at 2021

40 unit Personnel Vehicles arrived atAfrica 2021

35 unit dump trucks shipped to Africaat 2020

15 unit Water Trucks being shipped toSoutheast Asia at 2021

10 unit Special steam boiler trucks for oilfield shipped to Africa by 2022

60 unit Garbage Trucks arrived atSouth Africa 2020

50 unit 6-wheel drive off-road cargo trucksshipped to Africa by 2022

Faqs

How to purchase the truck from our company?

You can choose the model from our website. Also, you can tell our sales manger

your specific requirements and we will recommend the suitable model to you. After you confirm the model and price, we can sign the contract.

How to ensure product quality?

Firstly, we passed the international quality system certification. Secondly,you can entrust third party individuals or organizations to inspect our products before delivery.

Can you offer customized service?

Yes, we can produce according to your samples or technical datas. We can build the molds and fixtures.

What is the warranty term?

We can supply you with original parts. And we can provide phone or email support. If necessary, our experienced engineers can go abroad to provide technical support to your company.